|
20th Dec 2009 – “Belimo Take on a Sensor Range”
Belimo now stock a full range of sensors to meet the needs of the HVAC market.
Click here to Open a PDF sensor Manual.
15th Dec 2009 – “Version 1.8.1.0 Released”
Cabak Mon is under continual development and now includes a booking system and extended reporting features.
Additional features also include better alarm management and the ability to easily change alarm contacts, or disable for short periods such as annual leave.
Go to the Free Download Page to get a copy and trial for 30 days.
22nd May 2009 – “Stage 1 of Online Store Updated”
The first stage of the Cabak Online Store has been updated to include current prices and images of the products.
Click here to check it out now.
27th March 2009 – “Latest Version of Cabak Mon Software Available”
The Latest Version of the Cabak Mon Software, V1.6.0.0 is available for download here.This version incorporates
a more advanced alarm management system, as well as a hosts of new additions.
The Cabak Mon Software is under continual development and improvement. The latest edition includes the following:
Release Notes for V1.6.0.0:
Bugs
Support for Log Display and remove Accumulator Points in Trend Graphs
Alarms
Multiple Recipients
Pick via drop down combo box the USER to send the e-mail and SMS to could be different select tick box if different and have two combo boxes.
This needs to be added to from the USERs list and then allow the selected item in the list to be moved up or down in the list to set the priority, who gets it first.
SMS phone number and support per alarm
Label - "All members will be SMSed once", "Only the top non-disabled member will be emailed and then everyone will be emailed in turn once the time elapses"
Log Display
This needs to store Open, High, Low, Close for every 5 minute interval
Graphs (all)
Graph period always starts at 01/07/08, should be current month, week, day or hour as all other reports can you add a combo box for quick selection of period? If not default to one week prior to the current day
Graphs Trends
Fine resolution define start and end time (The trend does not allow for less than a day ie one hour or 10 min worth of data only whole days minimum)
Trends need to allow for LOG DISPLAY points
Back button too low on page place with print and clear buttons
Points Details
Units drop down %, kPa, kWhrs etc etc and allow the user to enter anything they like typing alt plus zero one seven six to get the degrees symbol does not work, so picking it is better.
SET UP
SMTP can this be an IP address as well as mail.optus.com.au
Registered Events
Need to be able to specify HOURS as well (i.e. email/SMS hourly)
Need to specify what TIME of the day the email / sms get sent
Add Recipients to the Events table (like alarm recipients)
SMS Events - Add SMS Alive & SMS Point Value events to the system
Points Details
When you have not ticked the LOG ALARM check box it still requires a alarm point value only display alarm point or type when LOG ALARM is checked
Installer
Also, there are 2 more help files available for download. These are for IComm and OPC Connections to the Cabak Monitor Software.
These documents can be accessed here:
IComm
OPC
15th July 2008 – “New Help File”
Here is the latest version of the Cabak Monitor Help File. Any comments or feedback, please email to mike@cabak.com.au
Cabak Monitor User Instructions
14th July 2008 – “Cabak Has Moved To Nundah!”
Cabak has now moved offices from our original position at Toombul, to a new setup at nearby Nundah.
Our contact address and phone number have thus changed to:
Unit 2/160 Ryans Road
Nundah QLD 4012
Ph: 07 3256 8606
All other contact details such as postal address and mobile number remain the same.
12th July 2008 – “Cabak Have Belimo”
Cabak now have in stock a full range of Belimo Damper Actuator products for sale.
10th July 2008 – “Cabak Have OPC Client In Mon App”
As suggested last update, Cabak now have an OPC client input in the Cabak Monitor Application Software,
enabling communications with any control system that has an OPC server.
17th June 2008 – “New Cabak Program Release”
Good news! The new Cabak program with the reports, alarms and setup configurable via the
application, is due for release.
This release will also have new features including a shortcut to open just the report pages
only and there is an option to print all reports for last month “set the variables only once” via a
single button right-click, no more excess user interaction required. Yes, this could be a
command run via another applications.
The program now uses sequel data base and any web interaction is easier and faster.
Oh Yeah! This is a big step forward.
An update on future releases that is not to far off, an OPC input will be incorporated. The
possibility of adding native BACNet is also being looked at as there have a few requests to
supply a version with this capability.
Cabak will shortly be stocking and supplying the TAC MicroNet products. This is an
exciting addition as TAC are able to offer a full range of products and support. In
addition, the Belimo damper actuator range will be held in stock.
7th January 2008 – “Cabak Billing Program”
CABAK now has 3 initial sites running the After Hours Usage Billing Program.
Initial instances of this program have been based on an Hours Usage, to generate a bill.
Currently under development is a modification to allow for either accumilator Kw/h, m3
or kJ depending on site hardware. Interface with most common control hardware or energy meters is possible,
provided an open data server is available.
The energy logging will have the ability to view and compare historical trending,
meaning this is no longer just an After Hours Usage Package, but rather a Total Energy Package.
This enables the client to compare this week's energy profile with last week's,
allowing for this data to be used in calculating the Australian Building Greenhouse Rating (ABGR)
For more detailed information click on the following links:
Billing Overview
Web Monitoring
Client Alert
11th December 2007 – “New Look Cabak Website”
A new website layout has been developed.
1st December 2007 – “Cabak Closing Dates”
Cabak will be closed from the 22nd of Dec 2007 until the 2nd of Jan 2008.
Have a Merry Christmas.
12th November 2007 – “Web Based Data Reference”
Product Data Sheet Reference library. Users who subscribe will
be offered access to a comprehensive web based data sheet library.
Covering all the main HVAC suppliers in one location.
Innotech, Siemens, Johnson, Barber-Colemen or advise me of what
hardware is in your building and I will endeavour to locate and
store the required information.
10th November 2007 – “Web Based Site Manuals”
No longer will buildings be hampered because the site operation
and maintenance manuals have been taken, lost or put in a really
safe place to prevent them becoming lost or taken off site.
Users who subscribe to the web monitoring will be offered a service
where the existing manuals can be stored and retrieved electronically on the web.
Hard copies can be printed and useful information like when, where, why and
how much can be entered by the client to provide a useful reference data base
for the future. So often the change over of service companies means the loss of
critical data and time is spent by the new company getting to know the site, this
time of course cost the client.
6th November 2007 – “New Software”
New billing software developed to
replace the Innotech Easybill solution.
Initially the software will be a Magellan
based and can only run with Magellan sites.
However the second stage that has now commenced
will be a standalone application where the site will
only require the Innotech iComm data server.
Read the Data Base Billing Overview for a detailed description of operation.
30th October 2007 – “Cabak Web Site Launched”
Initial Web Site has been put up.
Click here to Return Home
|